{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/jonmayfield/telly-remote/blob/f9f3505051bc3eb4a8c684b1d5ca0c09815d2cc5/flipper/firmware/README.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "Telly Remote controls a Telly TV through a Flipper Zero that emulates the TYRC-1 remote over Bluetooth HID and infrared. Its documentation records captured NEC extended infrared codes, Bluetooth advertisements and scan responses, and the PnP ID that selects the TV's key map; a local web server sends keys and menu sequences to the Flipper.",
  "description_zh": "Telly Remote 通过 Flipper Zero 模拟 TYRC-1 遥控器，以蓝牙 HID 和红外控制 Telly 电视。项目记录了捕获的 NEC extended 红外码、蓝牙广播包与扫描响应包，以及决定电视按键映射的 PnP ID；本地网页服务器向 Flipper 发送按键和菜单操作序列。",
  "entry_url": "https://awesomerea.org/resources/telly-remote-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/telly-remote-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/jonmayfield/telly-remote/blob/f9f3505051bc3eb4a8c684b1d5ca0c09815d2cc5/README.md",
  "group": "cases",
  "id": "telly-remote-case",
  "json_url": "https://awesomerea.org/resources/telly-remote-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/telly-remote-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/telly-remote-case/index.md",
  "name": "Telly Remote: reconstructing TYRC-1 remote control over Bluetooth and infrared",
  "name_zh": "Telly Remote：重建 TYRC-1 遥控器的蓝牙与红外控制",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "testing",
    "license"
  ],
  "requirements": [
    "Telly TV and Flipper Zero; Bluetooth control requires the Telly Remote app and patched Flipper firmware 1.5.1. Infrared works on stock firmware.",
    "macOS and Python 3; the author says the server may also work on Linux after adjusting the Flipper port glob.",
    "Tested on Telly model TY55_1.",
    "GPL-3.0 license."
  ],
  "requirements_zh": [
    "需要 Telly 电视和 Flipper Zero；蓝牙控制需要 Telly Remote 应用及打补丁的 Flipper 1.5.1 固件。原版固件可使用红外控制。",
    "需要 macOS 和 Python 3；作者称调整 Flipper 端口匹配规则后服务器也可能在 Linux 上运行。",
    "作者在 Telly TY55_1 型号上进行了测试。",
    "采用 GPL-3.0 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/jonmayfield/telly-remote",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}