Case study
stagg-net: investigating the Fellow Stagg EKG kettle UART
stagg-net investigates the Fellow Stagg EKG kettle's internal UART interface and documents its connector, serial settings, observed heartbeat packet, and startup message. The repository includes a logic capture, decoder source, probing scripts, and ESPHome configuration for an ESP32-C6 connection.
- Targets
- Protocol
- Category
- Independent reconstruction cases
- Relationship
- Independent reconstruction project
- Sources reviewed
Requirements & limits
- Prerequisites: Fellow Stagg EKG kettle hardware and a 3.3 V serial connection are needed for the described investigation.
- Limits: The author has observed status traffic but reports that the UART interface does not respond to the BLE packets tried.
- License: No licence file in the repository.
About this entry
The description was reviewed against primary sources.
Primary sources
- README.md GitHub · linux4life798/stagg-net · Revision d059204
More in Protocols
- TOZO Control: a Linux earbuds client built from the TOZO BLE protocol · Case study
- BMS RS485 Service Suite: reconstructing a battery-service bus protocol · Case study
- Petkit Local: reconstructing feeder cloud and fountain BLE controls · Case study
- IPI STAY FLY Driver: reconstructing mouse configuration over HID · Case study
- Soundcore D3200: reconstructing BLE recording transfer and decryption · Case study
- K1 Pro OpenDeck Suite: a Linux driver for the Stream Dock K1 Pro · Case study