{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/zlcoburn/SpiritHalloweenRemote-nrf24/blob/0a43043b16ced93eeb894e5cf53e83d8dca948a1/docs/findings.md",
    "https://github.com/zlcoburn/SpiritHalloweenRemote-nrf24/blob/0a43043b16ced93eeb894e5cf53e83d8dca948a1/docs/protocol.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "Spirit Halloween Remote documents radio messages recovered from a Spirit Multi-Prop remote and replays four captured commands through a Raspberry Pi nRF24L01+ transmitter. The protocol notes give the 250 kbit/s setting, channel, address and 22-byte command bodies; an optional Home Assistant bridge exposes trigger buttons.",
  "description_zh": "Spirit Halloween Remote 记录从 Spirit Multi-Prop 遥控器还原的无线消息，并通过树莓派连接的 nRF24L01+ 重放四条指令。协议文档列出 250 kbit/s 速率、信道、地址和 22 字节指令体；可选的 Home Assistant 桥接提供触发按钮。",
  "entry_url": "https://awesomerea.org/resources/spirit-halloween-remote-nrf24-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/spirit-halloween-remote-nrf24-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/zlcoburn/SpiritHalloweenRemote-nrf24/blob/0a43043b16ced93eeb894e5cf53e83d8dca948a1/README.md",
  "group": "cases",
  "id": "spirit-halloween-remote-nrf24-case",
  "json_url": "https://awesomerea.org/resources/spirit-halloween-remote-nrf24-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/spirit-halloween-remote-nrf24-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/spirit-halloween-remote-nrf24-case/index.md",
  "name": "Spirit Halloween Remote: decoding Multi-Prop radio commands",
  "name_zh": "Spirit Halloween Remote：解析 Multi-Prop 无线遥控指令",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "testing",
    "limits",
    "license"
  ],
  "requirements": [
    "A Raspberry Pi with Linux SPI and GPIO access, an nRF24L01+ radio and a matching powered receiver are required.",
    "The author reports testing one remote and receiver setup; compatibility with other units or revisions remains unconfirmed.",
    "Packet field meanings, checksum and radio-chip identity remain unresolved.",
    "MIT license."
  ],
  "requirements_zh": [
    "需要可访问 SPI 和 GPIO 的 Linux 树莓派、nRF24L01+ 无线模块，以及匹配且已供电的接收器。",
    "作者报告测试了一套遥控器和接收器；与其他设备或硬件版本的兼容性仍未确认。",
    "数据字段含义、校验方式及无线芯片型号仍未解明。",
    "采用 MIT 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "firmware",
    "protocol"
  ],
  "url": "https://github.com/zlcoburn/SpiritHalloweenRemote-nrf24",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}