{
  "added_at": "2026-11-08",
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "Samsung Washer Monitor for ESPHome decodes the receive-only UART stream between a Samsung WW11BGA046 washer's DC92-01950B panel and main board. Its ESPHome component exposes program selections, displayed time, indicators and inferred cycle status to Home Assistant. The documentation records connector observations, wiring and the limits of the author's single-machine testing.",
  "description_zh": "Samsung Washer Monitor for ESPHome 解码 Samsung WW11BGA046 洗衣机 DC92-01950B 面板与主板之间的单向接收 UART 数据。ESPHome 组件向 Home Assistant 提供程序选项、显示时间、指示灯状态及推断的洗涤周期状态。文档记录了接口观察、接线方式和单台机器测试的范围。",
  "entry_url": "https://awesomerea.org/resources/samsung-washer-monitor-esphome-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/samsung-washer-monitor-esphome-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/kralonur/samsung-washer-monitor-esphome/blob/847d55796f4f29197f9e2562c20c78272b844835/README.md",
  "group": "cases",
  "id": "samsung-washer-monitor-esphome-case",
  "json_url": "https://awesomerea.org/resources/samsung-washer-monitor-esphome-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/samsung-washer-monitor-esphome-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/samsung-washer-monitor-esphome-case/index.md",
  "name": "Samsung Washer Monitor: reconstructing a washer panel UART feed",
  "name_zh": "Samsung Washer Monitor：重建洗衣机面板 UART 数据流",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "prerequisites",
    "license"
  ],
  "requirements": [
    "A Samsung washer with the DC92-01950B panel and an ESPHome-supported ESP board; the author tested WW11BGA046 with ESP32-C6 SuperMini.",
    "A suitable 5 V to 3.3 V UART interface; the source specifies 9600 baud, 8N1.",
    "Mains appliance work requires safe isolation and qualified installation as described in the project's safety section.",
    "MIT License."
  ],
  "requirements_zh": [
    "需要配备 DC92-01950B 面板的 Samsung 洗衣机及 ESPHome 支持的 ESP 开发板；作者测试的是 WW11BGA046 与 ESP32-C6 SuperMini。",
    "需要合适的 5 V 至 3.3 V UART 接口；通信参数为 9600 baud、8N1。",
    "涉及市电设备的安装须按项目安全说明采取隔离措施并由具备相应能力者操作。",
    "采用 MIT 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/kralonur/samsung-washer-monitor-esphome",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}