{
  "added_at": "2026-11-08",
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "rfserver implements Raspberry Pi Pico W firmware for controlling LED lights through a decoded 433 MHz remote signal. It sends commands over RF, tracks changes made by the physical remote and exposes HTTP endpoints for commands and state.",
  "description_zh": "rfserver 为 Raspberry Pi Pico W 实现基于已解码 433 MHz 遥控信号的 LED 灯控制固件，可发送射频命令、跟踪实体遥控器造成的状态变化，并通过 HTTP 提供命令与状态接口。",
  "entry_url": "https://awesomerea.org/resources/rfserver-light-remote-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/rfserver-light-remote-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/bitcrshr/rfserver/blob/2a0d00ae4a16d657cadd26f9fb1702aa48aab690/README.md",
  "group": "cases",
  "id": "rfserver-light-remote-case",
  "json_url": "https://awesomerea.org/resources/rfserver-light-remote-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/rfserver-light-remote-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/rfserver-light-remote-case/index.md",
  "name": "rfserver: reconstructing a 433 MHz light remote",
  "name_zh": "rfserver：重建 433 MHz 灯光遥控通信",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "testing",
    "license"
  ],
  "requirements": [
    "Raspberry Pi Pico W, suitable 433 MHz transmitter and receiver, Pico SDK and picotool.",
    "The author reports trying the build only on Apple Silicon macOS.",
    "Unlicense."
  ],
  "requirements_zh": [
    "需要 Raspberry Pi Pico W、合适的 433 MHz 发射与接收模块、Pico SDK 和 picotool。",
    "作者报告只在 Apple Silicon macOS 上尝试过构建。",
    "采用 Unlicense 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/bitcrshr/rfserver",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}