{
  "added_at": "2026-11-09",
  "additional_evidence_urls": [
    "https://github.com/AnonTester/prt-qutie-label-printer/blob/e6e3f9c595bc4cd3e08a6886054b8b24d3d9e2d3/README.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "qutie implements Linux printing for the PRT Qutie label printer using a recovered Bluetooth Classic RFCOMM protocol. Its notes document handshake, session XOR, status responses and LZO raster commands derived from printer observation and HerePrint app analysis; a Python library, CLI, CUPS components and Qt designer use the protocol.",
  "description_zh": "qutie 利用恢复的 Bluetooth Classic RFCOMM 协议，在 Linux 上支持 PRT Qutie 标签打印机。协议笔记依据设备观察和 HerePrint 应用分析，记录握手、会话 XOR、状态响应及 LZO 栅格指令；Python 库、命令行、CUPS 组件和 Qt 标签设计器均使用该协议。",
  "entry_url": "https://awesomerea.org/resources/qutie-printer-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/qutie-printer-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/AnonTester/prt-qutie-label-printer/blob/e6e3f9c595bc4cd3e08a6886054b8b24d3d9e2d3/docs/protocol.md",
  "group": "cases",
  "id": "qutie-printer-case",
  "json_url": "https://awesomerea.org/resources/qutie-printer-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/qutie-printer-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/qutie-printer-case/index.md",
  "name": "qutie: reconstructing PRT Qutie Bluetooth printing",
  "name_zh": "qutie：重建 PRT Qutie 蓝牙打印协议",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "testing",
    "license"
  ],
  "requirements": [
    "Linux, Python 3.10+, a working Bluetooth adapter and a PRT Qutie printer.",
    "The author reports testing one firmware 1.1.22 printer with continuous 12 mm tape; gap labels and other models remain untested.",
    "MIT license."
  ],
  "requirements_zh": [
    "需要 Linux、Python 3.10+、可用的蓝牙适配器和 PRT Qutie 打印机。",
    "作者报告仅在一台固件为 1.1.22、使用 12 mm 连续标签带的打印机上测试；间隙标签和其他型号尚未测试。",
    "MIT 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/AnonTester/prt-qutie-label-printer",
  "verification": "source-reviewed",
  "verified_at": "2026-11-07"
}