{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/willadamskeane/quntis-monitor-light-esphome/blob/27fb0dc36631945daebb2f3a85d99826dd95a03c/README.md",
    "https://github.com/willadamskeane/quntis-monitor-light-esphome/blob/27fb0dc36631945daebb2f3a85d99826dd95a03c/LICENSE.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "Quntis Monitor Light for ESPHome recreates local control of a 26-inch Quntis monitor light through its observed XN297-compatible RF protocol. An ESP32-C3 and RF Nano transmit commands for power, brightness, color temperature and the separate glow light; protocol notes describe frames, CRC and rolling state.",
  "description_zh": "Quntis Monitor Light for ESPHome 根据观察到的 XN297 兼容射频协议，为 26 英寸 Quntis 显示器灯实现本地控制。ESP32-C3 与 RF Nano 发送开关、亮度、色温和氛围灯命令；文档记录帧结构、CRC 与滚动状态。",
  "entry_url": "https://awesomerea.org/resources/quntis-monitor-light-esphome-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/quntis-monitor-light-esphome-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/willadamskeane/quntis-monitor-light-esphome/blob/27fb0dc36631945daebb2f3a85d99826dd95a03c/docs/protocol.md",
  "group": "cases",
  "id": "quntis-monitor-light-esphome-case",
  "json_url": "https://awesomerea.org/resources/quntis-monitor-light-esphome-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/quntis-monitor-light-esphome-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/quntis-monitor-light-esphome-case/index.md",
  "name": "Quntis Monitor Light for ESPHome: reconstructing RF control",
  "name_zh": "Quntis Monitor Light for ESPHome：重建射频控制协议",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "limits",
    "license"
  ],
  "requirements": [
    "ESP32-C3 SuperMini, RF Nano V3, wiring, 5 V power and Home Assistant with ESPHome or the ESPHome CLI.",
    "The RF profile comes from one lamp with P014-TX-V1.1 remote PCB; a second unit has not been confirmed.",
    "ESPHome component and documentation: GPL-3.0-only; RF Nano firmware: GPL-2.0-only."
  ],
  "requirements_zh": [
    "需要 ESP32-C3 SuperMini、RF Nano V3、连接线、5 V 电源，以及配有 ESPHome 的 Home Assistant 或 ESPHome CLI。",
    "射频配置来自一盏遥控器电路板为 P014-TX-V1.1 的灯，尚未确认第二台设备的兼容性。",
    "ESPHome 组件和文档采用 GPL-3.0-only；RF Nano 固件采用 GPL-2.0-only。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/willadamskeane/quntis-monitor-light-esphome",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}