{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/corekill/poolcomfort-galaxywind/blob/6055d4e550e6119f46822f5ddcde9da321f6f1ca/docs/protocol.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "Pool Comfort / Galaxywind implements a local Python client and Home Assistant component for pool heat pumps using UDP behavior recovered from the vendor Android app and LAN captures. It documents discovery on port 8818, sessions on port 1194, login, state attributes and control commands.",
  "description_zh": "Pool Comfort / Galaxywind 根据厂商 Android 应用和局域网抓包结果，实现泳池热泵的 Python 本地客户端及 Home Assistant 组件。项目记录了 8818 端口发现、1194 端口会话、登录、状态字段和控制命令。",
  "entry_url": "https://awesomerea.org/resources/poolcomfort-galaxywind-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/poolcomfort-galaxywind-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/corekill/poolcomfort-galaxywind/blob/6055d4e550e6119f46822f5ddcde9da321f6f1ca/README.md",
  "group": "cases",
  "id": "poolcomfort-galaxywind-case",
  "json_url": "https://awesomerea.org/resources/poolcomfort-galaxywind-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/poolcomfort-galaxywind-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/poolcomfort-galaxywind-case/index.md",
  "name": "Pool Comfort / Galaxywind: a local heat-pump client from Android and UDP analysis",
  "name_zh": "Pool Comfort / Galaxywind：基于 Android 与 UDP 分析的泳池热泵本地客户端",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "testing",
    "license"
  ],
  "requirements": [
    "Requires a compatible Pool Comfort, Galaxywind or GWCD heat pump on the local network and its device password.",
    "The library requires Python 3.11 or newer; the Home Assistant component can be installed through HACS.",
    "The author reports testing one Pool Comfort unit; other OEM models need further captures.",
    "MIT License."
  ],
  "requirements_zh": [
    "需要局域网中的兼容 Pool Comfort、Galaxywind 或 GWCD 泳池热泵及设备密码。",
    "库需要 Python 3.11 或更新版本；Home Assistant 组件可通过 HACS 安装。",
    "作者报告只测试过一台 Pool Comfort 设备；其他 OEM 型号仍需更多抓包验证。",
    "MIT 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "app",
    "protocol"
  ],
  "url": "https://github.com/corekill/poolcomfort-galaxywind",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}