{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/cnfatal/open-ssd/blob/cc06bda956d9676c5d058c352bf2888729b9cfe7/docs/04-bridge/index.md",
    "https://github.com/cnfatal/open-ssd/blob/cc06bda956d9676c5d058c352bf2888729b9cfe7/docs/01-concepts/architecture.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "open-ssd reconstructs an initialization workflow for Silicon Motion SM2263-family SSDs. Its Python tool generates parameters, scans bad blocks, packages firmware and writes NAND system areas; accompanying documents map controller commands and JMS583 bridge passthrough behavior. The author identifies one tested SM2263XT, YMTC NAND and JMS583 combination.",
  "description_zh": "open-ssd 重建 Silicon Motion SM2263 系列 SSD 的初始化流程。Python 工具生成参数、扫描坏块、组装固件并写入 NAND 系统区；文档记录主控命令及 JMS583 桥接透传行为。作者列出了已实测的 SM2263XT、YMTC NAND 与 JMS583 组合。",
  "entry_url": "https://awesomerea.org/resources/open-ssd-sm2263xt-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/open-ssd-sm2263xt-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/cnfatal/open-ssd/blob/cc06bda956d9676c5d058c352bf2888729b9cfe7/README.md",
  "group": "cases",
  "id": "open-ssd-sm2263xt-case",
  "json_url": "https://awesomerea.org/resources/open-ssd-sm2263xt-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/open-ssd-sm2263xt-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/open-ssd-sm2263xt-case/index.md",
  "name": "open-ssd: reconstructing SM2263XT SSD initialization",
  "name_zh": "open-ssd：重建 SM2263XT SSD 初始化流程",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "testing",
    "license"
  ],
  "requirements": [
    "Python 3.10 or later is required; USB access additionally requires system libusb.",
    "The user's own factory package and a supported SM2263XT, YMTC NAND and JMS583 setup are required for the documented opening procedure.",
    "Opening erases and writes NAND; the revised MPInfo output has not yet undergone a native M.2 reflashing acceptance test.",
    "No licence file in the repository."
  ],
  "requirements_zh": [
    "需要 Python 3.10 或更新版本；USB 访问还需要系统安装 libusb。",
    "文档中的开卡流程需要用户自备原厂包，以及受支持的 SM2263XT、YMTC NAND 和 JMS583 组合。",
    "开卡会擦写 NAND；修订后的 MPInfo 输出尚未经过原生 M.2 重刷验收。",
    "仓库中没有许可证文件。"
  ],
  "scope": "unknown",
  "targets": [
    "firmware",
    "protocol"
  ],
  "url": "https://github.com/cnfatal/open-ssd",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}