{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/alexfrih/mchose-linux/blob/75204ccc3bd83883330176d1eefda211dd449576/README.md",
    "https://github.com/alexfrih/mchose-linux/blob/75204ccc3bd83883330176d1eefda211dd449576/LICENSE"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "mchose-linux reconstructs the MCHOSE mouse settings protocol and implements Linux CLI and GUI clients for it. Its documentation traces HID feature-report commands and configuration fields from the M HUB web bundle and an L7 Pro mouse. The clients read and change DPI, polling rate, lift-off distance and other stored settings.",
  "description_zh": "mchose-linux 重建 MCHOSE 鼠标的设置协议，并提供 Linux 命令行和图形客户端。协议文档依据 M HUB 网页程序包及 L7 Pro 鼠标整理 HID 功能报告命令和配置字段；客户端可读取、修改 DPI、回报率、抬起距离等设备设置。",
  "entry_url": "https://awesomerea.org/resources/mchose-hid-linux-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/mchose-hid-linux-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/alexfrih/mchose-linux/blob/75204ccc3bd83883330176d1eefda211dd449576/PROTOCOL.md",
  "group": "cases",
  "id": "mchose-hid-linux-case",
  "json_url": "https://awesomerea.org/resources/mchose-hid-linux-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/mchose-hid-linux-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/mchose-hid-linux-case/index.md",
  "name": "mchose-linux: MCHOSE HID settings protocol and Linux client",
  "name_zh": "mchose-linux：MCHOSE HID 设置协议与 Linux 客户端",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "testing",
    "limits",
    "license"
  ],
  "requirements": [
    "Linux with access to the mouse's hidraw node; Rust and Cargo are needed to build the clients.",
    "The author reports exercising the protocol on an MCHOSE L7 Pro; other listed models are not individually confirmed.",
    "The G3 family uses a different protocol and is unsupported.",
    "MIT license."
  ],
  "requirements_zh": [
    "需要 Linux 和鼠标 hidraw 节点访问权限；构建客户端需要 Rust 与 Cargo。",
    "作者报告已在 MCHOSE L7 Pro 上测试协议；所列其他型号未逐一确认。",
    "G3 系列使用不同协议，因此不受支持。",
    "MIT 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/alexfrih/mchose-linux",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}