{
  "added_at": "2026-11-09",
  "additional_evidence_urls": [
    "https://github.com/jbothe/homey-app-lucci-air/blob/79c9baa0b025e0b2b88f3a2280d1919e83c84ed2/RF_PROTOCOL.md",
    "https://github.com/jbothe/homey-app-lucci-air/blob/79c9baa0b025e0b2b88f3a2280d1919e83c84ed2/RF_PROTOCOL_CR2032.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "Lucci Air Homey App reconstructs the 433 MHz control protocols of USB-C and CR2032 Lucci Air fan handsets from recorded transmissions. Its Homey drivers learn a handset address and send fan and light commands; separate protocol documents describe frame layouts, command codes and observed hardware behavior.",
  "description_zh": "Lucci Air Homey App 根据录制的射频信号重建 Lucci Air USB-C 和 CR2032 风扇遥控器的 433 MHz 控制协议。Homey 驱动学习遥控器地址后发送风扇及灯光指令；两份协议文档记录帧结构、命令编码和硬件观察结果。",
  "entry_url": "https://awesomerea.org/resources/lucci-air-homey-app-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/lucci-air-homey-app-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/jbothe/homey-app-lucci-air/blob/79c9baa0b025e0b2b88f3a2280d1919e83c84ed2/README.md",
  "group": "cases",
  "id": "lucci-air-homey-app-case",
  "json_url": "https://awesomerea.org/resources/lucci-air-homey-app-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/lucci-air-homey-app-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/lucci-air-homey-app-case/index.md",
  "name": "Lucci Air Homey App: reconstructing two fan handset RF protocols",
  "name_zh": "Lucci Air Homey App：重建两种风扇遥控器射频协议",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "testing",
    "license"
  ],
  "requirements": [
    "A Homey device and the user's own Lucci Air handset are needed for address learning.",
    "The source reports that Homey flow triggers had not been run on a Homey; CR2032 light transmission was not tested on a fan with a light.",
    "GPL-3.0."
  ],
  "requirements_zh": [
    "学习地址需 Homey 设备和用户自己的 Lucci Air 遥控器。",
    "作者表示，Homey 流程触发器尚未在 Homey 上运行；CR2032 灯光发送也未在带灯风扇上测试。",
    "许可证为 GPL-3.0。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/jbothe/homey-app-lucci-air",
  "verification": "source-reviewed",
  "verified_at": "2026-11-07"
}