{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/Edsol/esphome-ideal-clima-nemo/blob/b28a86c6b6d273623311046d7a1d9ae5acbf33ee/extra/README.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "Ideal Clima Nemo 1000 local control replaces its Wi-Fi module with an ESP32-C3 on the CN2 connector and speaks the documented Tuya MCU UART exchange. The implementation exposes power, setpoint, mode and fan control through ESPHome or MQTT, with Python tools for passive frame decoding and bench commands.",
  "description_zh": "Ideal Clima Nemo 1000 本地控制方案在 CN2 接口接入 ESP32-C3，模拟 Wi-Fi 模块并使用记录下来的 Tuya MCU UART 通信。实现通过 ESPHome 或 MQTT 控制电源、设定温度、模式和风速，另附 Python 工具用于被动解帧及台架命令。",
  "entry_url": "https://awesomerea.org/resources/ideal-clima-nemo-local-control-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/ideal-clima-nemo-local-control-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/Edsol/esphome-ideal-clima-nemo/blob/b28a86c6b6d273623311046d7a1d9ae5acbf33ee/README.md",
  "group": "cases",
  "id": "ideal-clima-nemo-local-control-case",
  "json_url": "https://awesomerea.org/resources/ideal-clima-nemo-local-control-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/ideal-clima-nemo-local-control-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/ideal-clima-nemo-local-control-case/index.md",
  "name": "Ideal Clima Nemo 1000: reconstructing local Tuya MCU control",
  "name_zh": "Ideal Clima Nemo 1000：重建本地 Tuya MCU 控制",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "limits",
    "license"
  ],
  "requirements": [
    "An Ideal Clima Nemo 1000, ESP32-C3 and access to its internal CN2 connector.",
    "ESPHome or a PlatformIO MQTT setup; the MQTT option requires a broker.",
    "The author reports testing on Nemo 1000 only; ambient temperature and fault values are emitted at cold boot.",
    "MIT license."
  ],
  "requirements_zh": [
    "需要 Ideal Clima Nemo 1000、ESP32-C3，并能接触设备内部 CN2 接口。",
    "需要 ESPHome 或 PlatformIO MQTT 配置；MQTT 方案还需要消息代理。",
    "作者报告仅在 Nemo 1000 上测试；环境温度和故障值在冷启动时发送。",
    "采用 MIT 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/Edsol/esphome-ideal-clima-nemo",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}