{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/danderik88/fiat-ducato-x250-wican/blob/f46673d1d73acf8d59b8b427d0a888211b654cf9/docs/can-id-reference.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "The Fiat Ducato X250 WiCAN project decodes the 2009 vehicle's 50 kbit/s body-CAN messages into speed, RPM, lights, doors and other signals. It preserves five captures, a CAN ID reference, a Python decoder and listen-only WiCAN filters that publish values to Home Assistant over MQTT. The author reports checking signals against vehicle controls and instruments.",
  "description_zh": "Fiat Ducato X250 WiCAN 项目将 2009 款车型的 50 kbit/s 车身 CAN 消息解码为车速、转速、灯光、车门等信号。仓库保存五份抓包、CAN ID 参考表、Python 解码器，以及经 MQTT 向 Home Assistant 发布数据的只读 WiCAN 过滤配置。作者报告用车辆操作和仪表读数核对信号。",
  "entry_url": "https://awesomerea.org/resources/fiat-ducato-x250-wican-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/fiat-ducato-x250-wican-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/danderik88/fiat-ducato-x250-wican/blob/f46673d1d73acf8d59b8b427d0a888211b654cf9/README.md",
  "group": "cases",
  "id": "fiat-ducato-x250-wican-case",
  "json_url": "https://awesomerea.org/resources/fiat-ducato-x250-wican-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/fiat-ducato-x250-wican-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/fiat-ducato-x250-wican-case/index.md",
  "name": "Fiat Ducato X250: decoding the body CAN bus",
  "name_zh": "Fiat Ducato X250：解码车身 CAN 总线",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "limits",
    "license"
  ],
  "requirements": [
    "2009 Fiat Ducato X250 for the documented signal mapping.",
    "MeatPi WiCAN OBD dongle for the documented capture and MQTT setup.",
    "Other Ducato, Jumper and Boxer variants have not been tested; several listed signal decodings remain provisional.",
    "MIT licence."
  ],
  "requirements_zh": [
    "所述信号映射针对 2009 款 Fiat Ducato X250。",
    "所述采集与 MQTT 配置需要 MeatPi WiCAN OBD 设备。",
    "其他 Ducato、Jumper 和 Boxer 变型尚未测试；部分列出的信号解码仍待确认。",
    "采用 MIT 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/danderik88/fiat-ducato-x250-wican",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}