{
  "added_at": "2026-11-09",
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "ESP32 Controller for Charlton & Jenrick Fireplace recreates remote commands by transmitting captured RF payloads through a CC1101 module. Its firmware provides iRange 2-FSK and non-iRange ASK/OOK profiles, with controls exposed through a web interface, MQTT and Home Assistant.",
  "description_zh": "ESP32 Controller for Charlton & Jenrick Fireplace 使用 CC1101 模块发送采集到的射频数据，重建壁炉遥控命令。固件提供 iRange 2-FSK 和非 iRange ASK/OOK 配置，并通过网页、MQTT 和 Home Assistant 提供控制入口。",
  "entry_url": "https://awesomerea.org/resources/esp32-fireplace-controller-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/esp32-fireplace-controller-case/",
  "evidence_url": "https://github.com/Cian911/esp32-fireplace-controller/blob/473b1d86405c30f0e3eff38c4bf1bcb2b5044a7f/README.md",
  "group": "cases",
  "id": "esp32-fireplace-controller-case",
  "json_url": "https://awesomerea.org/resources/esp32-fireplace-controller-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/esp32-fireplace-controller-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/esp32-fireplace-controller-case/index.md",
  "name": "ESP32 Controller for Charlton & Jenrick Fireplace: reconstructing remote control",
  "name_zh": "ESP32 Controller for Charlton & Jenrick Fireplace：重建壁炉遥控功能",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "testing",
    "limits",
    "license"
  ],
  "requirements": [
    "ESP32-WROOM-32, a 3.3 V CC1101 433 MHz module, and PlatformIO with the Arduino ESP32 framework.",
    "The author reports testing i1800e and 1800E; other listed fireplace models remain untested.",
    "The CC1101 misses some remote transmissions, so the physical remote cannot stay synchronized with this controller.",
    "MIT licence."
  ],
  "requirements_zh": [
    "需要 ESP32-WROOM-32、使用 3.3 V 供电的 CC1101 433 MHz 模块，以及采用 Arduino ESP32 框架的 PlatformIO。",
    "作者报告已测试 i1800e 和 1800E；所列其他壁炉型号尚未测试。",
    "CC1101 会漏收部分遥控器信号，因此实体遥控器无法与此控制器保持同步。",
    "MIT 许可证。"
  ],
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/Cian911/esp32-fireplace-controller",
  "verification": "source-reviewed",
  "verified_at": "2026-11-08"
}