{
  "added_at": "2026-11-08",
  "additional_evidence_urls": [
    "https://github.com/Zoogara/deco-network-optimize/blob/af0323970837330144b4a0ecb3e45987987ec221/PROTOCOL.md"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "deco-network-optimize implements the TP-Link Deco app's private TMP/App-V2 Network Optimization sequence for a Deco X20-DSL. It opens an SSH direct-tcpip channel to tmpsvr, sends scan and poll commands, and requests channel optimization when the device reports an optimizable state. The accompanying protocol notes document framing, checksum and the recovered command opcodes.",
  "description_zh": "deco-network-optimize 实现 Deco X20-DSL 所用的 TP-Link Deco 应用私有 TMP/App-V2 网络优化流程。它通过 SSH direct-tcpip 连接 tmpsvr，发送扫描与轮询命令，并在设备报告可优化时请求重新选信道。协议文档记录帧格式、校验和与恢复出的操作码。",
  "entry_url": "https://awesomerea.org/resources/deco-network-optimize-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/deco-network-optimize-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/Zoogara/deco-network-optimize/blob/af0323970837330144b4a0ecb3e45987987ec221/README.md",
  "group": "cases",
  "id": "deco-network-optimize-case",
  "json_url": "https://awesomerea.org/resources/deco-network-optimize-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/deco-network-optimize-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/deco-network-optimize-case/index.md",
  "name": "deco-network-optimize: reconstructing Deco Network Optimization commands",
  "name_zh": "deco-network-optimize：重建 Deco 网络优化命令",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirements": [
    "A Deco device using the TMP/App-V2 protocol and access to the master device are required; the research used an X20-DSL.",
    "Python 3, ssh2-python and the owner's TP-Link cloud account credentials are required.",
    "MIT licence."
  ],
  "requirements_zh": [
    "需要使用 TMP/App-V2 协议的 Deco 设备及主设备访问权限；研究所用机型为 X20-DSL。",
    "需要 Python 3、ssh2-python 和设备所有者的 TP-Link 云账户凭据。",
    "许可证为 MIT。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/Zoogara/deco-network-optimize",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}