{
  "added_at": "2026-11-09",
  "category": "protocol-analysis",
  "description_en": "BresserWeatherSensorReceiver is an Arduino library for receiving and decoding 868 MHz transmissions from Bresser weather sensors. It tries 7-in-1, 6-in-1, 5-in-1, lightning and leakage payload decoders and documents how 6-in-1 sensors alternate partial weather messages.",
  "description_zh": "BresserWeatherSensorReceiver 是接收并解码 Bresser 气象传感器 868 MHz 无线信号的 Arduino 库。它依次尝试 7-in-1、6-in-1、5-in-1、雷电及漏水传感器载荷解码器，并说明 6-in-1 设备交替发送两类不完整气象消息的行为。",
  "entry_url": "https://awesomerea.org/resources/bresser-weather-sensor-receiver/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/bresser-weather-sensor-receiver/",
  "evidence_url": "https://github.com/matthias-bs/BresserWeatherSensorReceiver/blob/88d22fd955e2f02b4639be37e7393ff1232de035/README.md",
  "group": "tools",
  "id": "bresser-weather-sensor-receiver",
  "json_url": "https://awesomerea.org/resources/bresser-weather-sensor-receiver/record.json",
  "kind": "tool",
  "markdown_url": "https://awesomerea.org/resources/bresser-weather-sensor-receiver/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/bresser-weather-sensor-receiver/index.md",
  "name": "BresserWeatherSensorReceiver",
  "name_zh": "BresserWeatherSensorReceiver 气象传感器无线协议解码库",
  "record_type": "resource",
  "relationship": "foundation",
  "requirement_facets": [
    "prerequisites",
    "limits",
    "license"
  ],
  "requirements": [
    "A supported Arduino board, RadioLib and a CC1101, SX1276/RFM95W, SX1262 or LR1121 radio module.",
    "Some listed sensors are marked as needing testing, and the 8-in-1 tglobe_c value is preliminary.",
    "MIT licence."
  ],
  "requirements_zh": [
    "需要受支持的 Arduino 开发板、RadioLib，以及 CC1101、SX1276/RFM95W、SX1262 或 LR1121 无线模块。",
    "部分列出的传感器仍待测试，8-in-1 的 tglobe_c 数值为初步结果。",
    "采用 MIT 许可证。"
  ],
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/matthias-bs/BresserWeatherSensorReceiver",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}