{
  "added_at": "2026-11-08",
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "The BMW G08 heater blower project uses an STM32G431KB LIN master node to investigate which payload fields track blower drive voltage, current and fan speed. The repository includes controller firmware and images of the blower setup and serial monitor.",
  "description_zh": "BMW G08 鼓风机项目使用 STM32G431KB LIN 主节点，研究哪些载荷字段与鼓风机驱动端电压、电流及转速的变化对应。仓库包含控制器固件，以及鼓风机装置和串口监视器的图像。",
  "entry_url": "https://awesomerea.org/resources/bmw-g08-blower-lin-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/bmw-g08-blower-lin-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/ufnalski/lin_bus_bmw_g08_heater_blower_g431kb/blob/acdc8f783c0cacd566b28ec9600acef6f1176c7c/README.md",
  "group": "cases",
  "id": "bmw-g08-blower-lin-case",
  "json_url": "https://awesomerea.org/resources/bmw-g08-blower-lin-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/bmw-g08-blower-lin-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/bmw-g08-blower-lin-case/index.md",
  "name": "BMW G08 blower: probing LIN payload fields",
  "name_zh": "BMW G08 blower：探查 LIN 载荷字段",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "license"
  ],
  "requirements": [
    "A BMW G08 heater blower and STM32G431KB setup.",
    "Generate CMSIS and STM32G4 HAL driver files from the .ioc project in MyST.",
    "MIT License."
  ],
  "requirements_zh": [
    "需要 BMW G08 鼓风机和 STM32G431KB 环境。",
    "需要在 MyST 中依据 .ioc 工程生成 CMSIS 和 STM32G4 HAL 驱动文件。",
    "MIT 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/ufnalski/lin_bus_bmw_g08_heater_blower_g431kb",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}