{
  "added_at": "2026-11-09",
  "additional_evidence_urls": [
    "https://github.com/leoratte/aquacomputer-quadro-control/blob/1bfbe3d4400b329264bd6e1b6ca4ce6ddef4f41f/README.md",
    "https://github.com/leoratte/aquacomputer-quadro-control/blob/1bfbe3d4400b329264bd6e1b6ca4ce6ddef4f41f/pyproject.toml"
  ],
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "aquacomputer-quadro-control reconstructs USB configuration access for the Aquacomputer Quadro fan controller. Its Linux client reads saved settings and changes fan, sensor and RGB values; accompanying captures document packet offsets, checksum placement and a usbmon capture workflow.",
  "description_zh": "aquacomputer-quadro-control 还原 Aquacomputer Quadro 风扇控制器的 USB 配置交互。Linux 客户端可读取配置并修改风扇、传感器和 RGB 参数；抓包资料记录了数据偏移、校验字段及 usbmon 抓取流程。",
  "entry_url": "https://awesomerea.org/resources/aquacomputer-quadro-control-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/aquacomputer-quadro-control-case/",
  "evidence_class": 2,
  "evidence_status": "observed",
  "evidence_url": "https://github.com/leoratte/aquacomputer-quadro-control/blob/1bfbe3d4400b329264bd6e1b6ca4ce6ddef4f41f/data/README.md",
  "group": "cases",
  "id": "aquacomputer-quadro-control-case",
  "json_url": "https://awesomerea.org/resources/aquacomputer-quadro-control-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/aquacomputer-quadro-control-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/aquacomputer-quadro-control-case/index.md",
  "name": "aquacomputer-quadro-control: reconstructing Quadro USB configuration",
  "name_zh": "aquacomputer-quadro-control：重建 Quadro USB 配置交互",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "limits",
    "license"
  ],
  "requirements": [
    "Linux, Python 3.8 or newer and an Aquacomputer Quadro; the author reports tests on Manjaro and Ubuntu 21.10 with firmware 1028.",
    "Full RGB control and configuration-value validation are not implemented.",
    "GPL-3.0 license."
  ],
  "requirements_zh": [
    "需要 Linux、Python 3.8 或更新版本及 Aquacomputer Quadro；作者报告在固件 1028 的设备上使用 Manjaro 和 Ubuntu 21.10 测试。",
    "尚未实现完整 RGB 控制和配置值校验。",
    "GPL-3.0 许可证。"
  ],
  "scope": "unknown",
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/leoratte/aquacomputer-quadro-control",
  "verification": "source-reviewed",
  "verified_at": "2026-11-06"
}