{
  "added_at": "2026-11-09",
  "category": "reconstruction-cases",
  "class": "hardware",
  "description_en": "433home reconstructs the 433 MHz control signals of REV wireless power sockets. The author measured remote-control output with a receiver and logic analyzer, documented pulse timings and 25-bit on/off commands for three sockets, and implemented an ESP8266 web frontend that transmits those sequences.",
  "description_zh": "433home 还原了 REV 无线插座的 433 MHz 控制信号。作者使用接收器和逻辑分析仪测量遥控器输出，记录脉冲时序及三个插座的 25 位开关命令，并实现发送这些序列的 ESP8266 网页控制端。",
  "entry_url": "https://awesomerea.org/resources/433home-case/",
  "entry_url_zh": "https://awesomerea.org/zh/resources/433home-case/",
  "evidence_url": "https://github.com/jadeaffenjaeger/433home/blob/4f5e29ce8a7f72e1f300528cd0cb98fbdc3d19a8/README.md",
  "group": "cases",
  "id": "433home-case",
  "json_url": "https://awesomerea.org/resources/433home-case/record.json",
  "kind": "case-study",
  "markdown_url": "https://awesomerea.org/resources/433home-case/index.md",
  "markdown_url_zh": "https://awesomerea.org/zh/resources/433home-case/index.md",
  "name": "433home: reconstructing REV power-switch radio commands",
  "name_zh": "433home：重建 REV 插座遥控信号",
  "record_type": "resource",
  "relationship": "independent-reconstruction",
  "requirement_facets": [
    "prerequisites",
    "prerequisites",
    "license"
  ],
  "requirements": [
    "An ESP8266 and 433 MHz transmitter are used for the controller; the analysis used a receiver and logic analyzer.",
    "Wi-Fi credentials must be compiled into the firmware, and PlatformIO builds and flashes it.",
    "No licence file in the repository."
  ],
  "requirements_zh": [
    "控制端使用 ESP8266 和 433 MHz 发射器；信号分析使用接收器与逻辑分析仪。",
    "Wi-Fi 凭据需编入固件，并使用 PlatformIO 构建和刷写。",
    "仓库中没有许可证文件。"
  ],
  "targets": [
    "protocol"
  ],
  "url": "https://github.com/jadeaffenjaeger/433home",
  "verification": "source-reviewed",
  "verified_at": "2026-11-07"
}